7" LIFT KIT W/ REAR BLOCKS 23-26 F-350 SUPER DUTY DRW - BDS2260FS

BDS 7" RADIUS ARM SUSPENSION LIFT KIT WITH REAR BLOCK KIT AND FOX 2.0 SHOCKS | 23-26 F-350 SUPER DUTY DRW

• 100 % bolt-on installation.
• Pro-Ride Dual rate coil springs provide a remarkable ride through any terrain.
• Heavy Duty tubilar steel radius arms which correct casterh while maximizing ground clearance.
• Track bar relocation bracket and pitman arm to maintain proper steering angles for improved handling.
• Fabricated steel blocks provide level stance front to rear.

Important Note: Ford recommends the replacement of the pitman arm nut after each time it has been removed. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper. If your truck is equipped with a factory rear sway bar add: BDS-123808 If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS-123402. Larger tires on the stock wheels are not recommended due to the brake line clearance required. Indexing Ring has NOT been designed to work on manual shift transfer case models. Modification of the shift cable mount will be required. Installation requires a torque wrench capable of 405 ft-lbs. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends having this performed prior to installing the lift. Vehicles with radius arm mounted ride height sensors will re