Towing (2002)

IDLER HUB ASSEMBLY FOR 2,200-LB. AXLE - 4 ON 4"; 1/2" (FULLY ASSEMBLED) Lippert® genuine replacement part Idler Hub Assembly #141281 Bearing cones, seal, and grease come installed Axle rating:...

CURT BASE PLATE ; 19-21 SILVERADO 1500 / 21-24 SUBURBAN Z71 / 21-24 TAHOE Z71 / 21-24 YUKON AT4 / 21-24 YUKON XL AT4 Protected by a durable high-gloss black...

4-FLAT WIRE HARNESS 23-25 NIRO/ 23-25 NIRO EV Backed by a limited one-year warranty Dust cover included to keep connector clean when not in use Constructed with SMT circuitry for...

CLASS 3 BALL MOUNT (2" SHANK, 5,000 LBS., 10" DROP, 14" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CLASS 3 BALL MOUNT (2" SHANK, 7,500 LBS., 6" DROP, 12-1/4" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CLASS 3 BALL MOUNT (2" SHANK, 5,000 LBS., 8" DROP, 11-1/2" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

LOADED BALL MOUNT WITH 2" BALL (2" SHANK, 7,500 LBS., 4" DROP) Rated to 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Fits trailer hitches with a 2"...

CLASS 3 BALL MOUNT (2" SHANK, 5,000 LBS., 10" DROP, 13" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CLASS 3 BALL MOUNT (2" SHANK, 5,000 LBS., 8" DROP, 13" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CLASS 3 BALL MOUNT (2" SHANK, 7,500 LBS., 2" DROP, 10-1/4" LONG) Fits trailer hitches with a 2" x 2" receiver tube opening Equipped with a 1" hole to accept...

CURT HAND-CRANK 2-SPEED WINCH 2600LBS Universal, slotted screw holes for flexible mounting Compatible replacement for most DL and Fulton winches Ideal for winching +20-foot-long boats onto boat trailer Rated for...

ROUND SPINDLE WASHER - 1.06" ID - 2" OD #179660 Replacement round spindle washer Inside diameter: 1.06" Outside diameter: 2"

IDLER HUB FOR 2,200-LB. AXLE - 5 ON 4.5"; 6.5" HUB FLANGE, 1/2" STUDS Idler hub only (full assembly not included) Lippert™ genuine replacement part Axle rating: 2,200 lbs. Wheel...

DOUBLE LIP GREASE SEAL - 2,200-LB. BRAKE & IDLER HUB ASSEMBLIES, 1.5" ID For 2,200-lb. axle capacities Hub bore diameter: 1.983" Spindle diameter: 1-1/2" Width: 1/4" Grease application

CURT CLASS 3 HITCH WITH 2-INCH RECEIVER ; 24-25 RANGER Rated to 7,500 lbs. gross trailer weight and 750 lbs. tongue weight Compatible with weight distribution hitch (8,000 lbs. WD...

IDLER HUB FOR 2,200-LB. AXLE - 5 ON 4.5"; 5.5" HUB FLANGE, 1/2" STUDS Idler hub only (full assembly not included) Lippert™ genuine replacement part Axle rating: 2,200 lbs. Bolt...

OUTER BEARING RACE - 7,000-LB. AXLES #127012 Outer race: Fits 7,000-lb. axle hubs Industry number: 14276 Pairs with bearing cone 14125A Shaft diameter: 1-1/4"

OUTER BEARING CONE - 7,000-LB. AXLES Outer cone: Fits 7,000-lb. axle hubs Industry number: 14125A Pairs with bearing race 14276 Shaft diameter: 1-1/4"

OUTER BEARING RACE - 5,200 TO 6,000-LB. AXLES Outer race: Fits 5,200 to 6,000-lb. axle hubs Industry number: 15245 Pairs with bearing cone 15123 Shaft diameter: 1-1/4"

INNER / OUTER BEARING RACE - 2,000 TO 3,500-LB. AXLES #125102 Inner race: Fits 2,000-lb. axle hubs Outer race: Fits 2,000 to 3,500-lb. axle hubs Industry number: L44610 Pairs with...