4" LIFT KIT W/ FOX 2.0 PERFORMANCE SHOCKS 21-25 F150 4WD - BDS1583FPE

• FOX 2.5 coil-over shocks designed specifically for increase travel and the ability to soak up the roughest terrain.
• DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs.
• High clearance crossmembers improve strength and offroad capability.
• Heavy duty steering knuckles to correct steering geometry and maintain ESC system compatibility.
• Top mounted strut spacers to provide lift and install easily.
• Differential skid plate for improved offroad protection.
• Rear lift blocks and u-bolts to lift and level the stance.
• Functions with Blue Cruise.

Important Note: 18" or larger diameter wheels are required. Stock 17" and 18" wheels cannot be re-installed. Stock 20" wheels can be used with up to a 305/60R20 tire. 18" wheels with 5-5.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle/tie rod. 5.5" backspacing is highly recommended for tire-to-frame crash bar clearance. Models with 2-piece rear driveshaft WILL require carrier bearing shim kit BDS-122406 (not included w/ kit) Block kits replace factory 1-1/4" block. The stock block will not be reinstalled. Crash bars may require modification based on wheel and tire choice. It is the end user's responsibility to ensure modifications are non-detrimental to vehicle safety. Does NOT fit diesel models. Will not work with Tremor models. Some trucks with a 2 piece drive shaft may have a recall from Ford regarding the rear driveshaft. (Safety Recall 21S25) Due to the recall procedure,