5" LIFT KIT W/ 5" REAR BLOCK KIT 23-26 S/DUTY DIESEL W/ OVERLOADS - BDS2203H

BDS 5" RADIUS ARM LIFT KIT WITH 3" REAR LIFT (5" BLOCK KIT) AND NX2 NITRO SHOCKS | 23-26 F-250/F-350 SUPER DUTY WITH OVERLOADS

• Easy 100% Bolt-on installation
• Pro-Ride dual rate coil springs ride smooth through any terrain
• Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
• Adjustable solid steel track bar designed to recenter the front axle
• Fabricated steel blocks provide level stance from front to rear
• Standard NX2 Nitro shocks with vehicle-specific valving for better control
• Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road

Important Note: Vehicles with radius arm mounted ride height sensors will require BDS-123303. Vehicles with leaf spring ride height sensors must select the rear block option. Fits SRW models only. Ford recommends the replacement of the pitman arm nut after each time it has been removed. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS-123402. Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups. Installation requires a torque wrench capable of 406 ft-lbs. Trucks without top